2020/05/05

Main features and software functions of iron loss meter

The silicon steel sheet iron loss meter is widely used in the quality management of silicon steel sheet manufacturers, sales manufacturers, motors and transformers, etc. It is mainly used in the inspection of silicon steel sheet incoming materials, processing monitoring and other production links, with simple and convenient operation.

2020/04/20

FE-30SST silicon steel sheet iron loss measuring instrument panel introduction and operation instructions

The FE-30SSTLOSSMETER silicon steel sheet iron loss measuring instrument of Hunan Yongyi Technology Co., Ltd. is quite different from similar products on the market at present. The single machine is equipped with a calibrated magneticometer to meet the measurement of oriented and non-oriented monolithic silicon steel, and to meet the more accurate measurement of the mass loss Ps and magnetic induction Bm of silicon steel sheet. Can be equipped with the upper computer software, can be B- H hysteresis loop, u-H permeability curve and Ps-B loss curve measurement, under certain circumstances, to meet the alternative square ring standard test silicon steel strip sample of the full performance parameters.

2020/04/07

Measurement method of H-coil magnetometer for soft magnetic materials measuring open strip bar

According to the shape of the soft magnetic material sample, the two measurement methods of closed circuit magnetic ring and open circuit strip rod can be divided into open circuit solenoid method and H coil magnetometer method. The following is the H-coil magnetometer measurement method for soft magnetic materials to measure open strip rods:

2020/04/02

Soft magnetic materials-Method of measurement for open-circuit strip bar solenoids

According to the shape of the soft magnetic material sample, the two measurement methods of closed circuit magnetic ring and open circuit strip rod can be divided into open circuit solenoid method and H coil magnetometer method. The following is the soft magnetic material open strip bar solenoid measurement method:

2020/03/31

Measurement of soft magnetic materials-Methods of measurement of closed-circuit magnetic rings

According to the shape of the soft magnetic material sample, the two measurement methods of closed circuit magnetic ring and open circuit strip rod can be divided into open circuit solenoid method and H coil magnetometer method. The following is the measurement method of closed-circuit magnetic ring for soft magnetic material measurement:

2020/03/25

Analysis of nondestructive testing of permanent magnet materials using the pole head embedded coil method

Using the electromagnet pole surface embedded coil method to test the permanent magnet material is an application-oriented technical scheme designed according to the BH characteristics of the current industrial test permanent magnet material. Since the actual size and shape of the sample do not need to be considered during the test, there is no need to wind or set a fixed B/J coil on the magnet, and only the test sample needs to be completely covered on a coil embedded in the pole head, the test is convenient, The repeatability is good, and there is a certain market prospect.

< 1...789...21 >