Measurement of magnetic flux using Helmholtz coils


The magnetic flux meter must be matched with a coil to measure the magnetic flux of the magnet. The coil may be a single coil or may be equipped with a Helmholtz coil.

   magnetic flux meterTo cooperate with the coil to measure the magnetic flux of the magnet. The coil can be a single coil, can also be equipped Helmholtz coil. Because when using a fluxmeter (meter) to detect permanent magnets, it is usually used" Tirafa"This method is intuitive and effective to set magnetic flux with flat coils for magnetized samples, but the disadvantage is that coils of different sizes must be made for each sample of different specifications. Strictly speaking, for very thin samples, the preparation of detection coils is also difficult, laborious and inefficient. But Helmholtz coilMeasurement of magnetic flux, to a certain extent, can solve the above problems, Hunan Yongyi Technology Co., Ltd.This method is widely used to detect batch products. So say magnetic flux meterUse Helmholtz coilMeasuring the magnetic flux is a more suitable method.
magnetic flux meterTooling case picture
Multi-pole magnetic ring fluxmeter tooling
 
1. Connect the signal output terminal of the coil with the signal input terminal of the flux meter, and adjust the position of the platform inside the coil to make the height of the platform suitable for the measurement requirements. (The appropriate height is that after the sample is placed in the coil, the center line of the sample is exactly aligned with the center of the coil viewing hole.
 
2. Place the sample in the center of the coil, press the zero button of the fluxmeter to make the data of the fluxmeter display zero, and then take away the magnet. At this time, the data displayed by the fluxmeter is the working magnetic flux of the magnet.