Hunan Forever Elegance Technology Co.,Ltd.

NEWS CENTER

FE-2100RD magnetic distribution automatic measuring instrument space magnetic field distribution measuring instrument Magnet analyzer case sharing

Release time:

2020-01-10

Source:

Www.fe2100.com

The FE-2100RD space magnetic field distribution measuring instrument is mainly composed of an industrial control computer (measurement software), a motion control system and a data acquisition system. First, a test command is sent through the industrial control computer to control the motion control system to complete the set motion trajectory. At the same time, the data acquisition system synchronously controls the work of the data acquisition system. The data acquisition system collects data in X, Y and Z directions through Hall sensors, and then transmits the data to the industrial control computer for data processing, finally, the three-dimensional magnetic field distribution map is obtained.

The FE-2100R series surface magnetic field distribution measuring instrument is a self-developed surface magnetic distribution measuring instrument that combines the actual needs of multi-pole magnetic ring manufacturers and motor enterprise users, carefully designs the test bench and controls the operation of the motor.

FE-2100R series surface magnetic field distribution measuring instrument Eternal TechnologyYears of development efforts, a total of four different models for users to choose. FE-2100RD space magnetic field distribution measuring instrumentIt is mainly composed of industrial control computer (measurement software), motion control system and data acquisition system. First, the test command is sent through the industrial control computer to control the motion control system to complete the set motion trajectory. At the same time, the data acquisition system is synchronously controlled. The data acquisition system collects data in X, Y and Z directions through Hall sensors, and then transmits the data to the industrial control computer for counting. According to the processing, the three-dimensional magnetic field distribution map is finally obtained. The following isFE-2100RD meter magnetic distribution automatic measuring instrumentSpace magnetic field distribution measuring instrument Magnet analyzer customer case sharing.

1. FE-2100RD space magnetic field distribution measuring instrument Description of equipment composition

1. Gantry test platform: including probe electric control adjustment mechanism, XYZ electric adjustment system, optical electric rotating platform and precision three-jaw

Chucks, sweeping tables, etc.

2. Multi-pole magnetic ring test host: including automatic range gaussmeter and stepper motor drive control center.

3. FE-2100 multi-pole distribution test software (permanent magnet material plane scanning test software).

4. A set of brand industrial computer and laser printer;

5. A set of test probes (vulnerable devices: a set of distribution);

Standard magnetic field: provide third-party inspection report (1000Gs);

7. Distribution three and high-precision roundness meter: accuracy 0.001mm;

8. Distribution standard round rod: roundness is better than 0.01mm.

2. FE-2100RD meter magnetic distribution automatic measuring instrumentTechnical parameter content

1. The probe moves XYZ software controls the automatic dynamic adjustment, and the corresponding stroke of X/Y/Z is 300mm/300mm/300mm;

2. XYZ axis, moving resolution 0.01mm, return accuracy ± 0.02mm;

3. The rotation concentricity of the three-jaw chuck is 0.01mm mm, and the overall concentricity is better than 0.035mm.

3-1, optical electric translation table, model: 01RS003 optical electric rotary platform, change ratio 1:180, precision measurement 36000 Step/turn, test time 60 seconds, table diameter 200mm;

3-2, Taiwan imported thousand island three-jaw chuck, model: SE-03, catch card diameter range: 1mm ~ 84mm, Add a fixture or sweep flat on a non-magnetic table;

3-3. The installation position of the rotating platform is moved forward to meet the measurement of samples with a sample diameter of less than 400mm.

4. Non-magnetic aluminum alloy optical flat sample stage (designed according to user requirements, flatness is better than 0.02mm/300mm × 300mm),

Meet the measurement of the plane magnetic field distribution of permanent magnet devices, the alignment accuracy is better than ± 0.02mm, the scanning plane: 220mm × 220mm;

5. Automatic range of gauss meter of test host (double probe switching):0.2k/0.4k/1k/2k/4k/10k/20kGs 7th gear automatic range; Points

Identification rate: corresponding to 0.2 per cent of the full scale of each gear, below 400Gs, valid for 0.1Gs; Accuracy: corresponding to 1.0 per cent of the full scale of each gear;

6. Test probe: thickness 2mm, width 3mm, front end extension length 100mm, equipped with horizontal scanning and radial scanning to meet the needs of different test requirements;

7. The repeatability of magnetic field measurement is better than: ± 0.3%.

8. Software part:

8-1, each pole magnetic field peak maximum value, minimum value and average value of automatic measurement function;

8-2, each pole pole width maximum, minimum and average value of automatic measurement function;

8-3, the magnetic pole area, half width, duty cycle and other automatic measurement function;

8-4, zero automatic return function and with anti-jitter invalid data elimination function;

8-5, automatic output XY coordinate graph curve function, XY coordinate report can be enlarged at will on the interface;

8-6, automatic output polar coordinate graph function, polar coordinate report can be enlarged at will on the interface;

8-7, automatic output corresponding to the fundamental harmonic analysis function;

8-8. For the same sample, combine the three-dimensional magnetic field distribution display function of the test point;

8-9, each polar angle, peak value, area list storage function;

8-10. Plane scanning. Currently, the probe is designed to scan the XY plane corresponding to the center point, and the center is (0,0,Z)

The standard system displays the plane magnetic field and accepts the user's change requirements for the equipment;

8-11, test software can choose Chinese and English operation interface, test report can choose Chinese report or English report;

8-12. The original test data is saved in Notepad file. Users can also open. dat file under Excel file and edit it

Align rows and columns for more detailed analysis of the data.

9. Other:

For the multi-pole rotating chuck, record a variety of test sample specifications according to the set parameters, and automatically control the back test point, stop point and initial point to speed up the test efficiency. Z axis users can set the minimum limit according to the actual software to avoid damage to the probe.

10, FE-2100RD meter magnetic distribution automatic measuring instrumentEquipment Appearance

recommend reading:

　　Research and development process of magnetic field distribution on the surface of multi-pole magnetizing magnetic ring FE-2100R table magnetic distribution measuring instrument

　　 Table magnetic distribution measuring instrument-specially designed for multi-pole magnetic ring manufacturers and motor enterprise users

　　 Multi-pole magnetic ring distribution measuring instrument for motor industry magnetic distribution measuring device

　　 FE-AMZ001 multi-pole magnetic ring automatic magnetizing and flux detection system

FE-103 desktop gauss meter instructions

Helmholtz coil design case sharing

FE-103 desktop gauss meter instructions

Helmholtz coil design case sharing

This site supports IPv4 IPv6.

Business License

SEO

Cloud information