-
-
-
Service Support
-
-
Products
-
-
FE-2100HAB type permanent magnet material magnetic property measuring device
-
FE-2100H Permanent Magnetic Material Automatic Measuring Device
-
FE-2100MQ Rare Earth Permanent Magnet Material Quality Test Device
-
FE-2100AM permanent magnet magnetic declination measuring instrument
-
FE-2100MD Rare Earth Permanent Magnetic Flux Density Experimental Device
-
-
Contact Us
-
Sales Department 1 (Product Selection and Design)
Contact: Yonghong Zhu
Responsible scope: Selection guide for magnetic measurement products,Design of non-standard magnetic measurement andmagnetic field equipment,FE-2100AM Permanent magnet magnetic declination measuring instrument, FE-2100MQ permanent magnet magnetic moment measuring instrument.
-
Sales Department 2 (Magnetic Field Generation and Coil)
Contact: Ye Hu
Responsible scope: Mainly responsible for Gauss meter and flux meter Magnetic field coils, magnetic field generators, Measuring magnetic field coils, magnetizers and other equipment.
-
Sales Department 3 (Hard magnetic materials)
Contact: Bin Yuan
Responsible scope: FE-2100R series space magnetic field measuring instrument,Permanent magnet material measurement technology consultation,FE-2100H permanent magnet material measuring device and other equipment.
-
Sales Department 4（Soft magnetic materials）
Contact: Jiaquan Ding
Responsible scope:FE-30SST silicon steel sheet iron loss tester,FE-2100M silicon steel material measuring device,FE-2100SA Soft Magnetic AC Measuring Device,FE-2100SD soft magnetic DC measuring device and other instruments.
25cm standard Epstein square circle
Classification:
Hotline:
- 产品描述
- Technical parameter
-
- Commodity name: 25cm standard Epstein square circle
- Commodity ID: 1303290225022881792
According to the IEC404-2 standard, the 25 cm Epstein square circle is the basis for measuring the magnetic properties of electrical steel sheets (strips). From DC to 10kHz, that is, the entire frequency range of electrical steel sheets, the measurement principle of its DC characteristics is the impact method. The measurement principle of AC characteristics is voltammetry (or called power meter, voltmeter, ammeter method).
Product introduction Comply with the national standard GB/T3655-2008 and GB 10129-88, and can be matched with FE-2100M silicon steel measuring device use. According to the IEC404-2 standard, the 25 cm Epstein square circle is the basis for the magnetic performance measurement of electrical steel sheet (belt). From DC to 10kHz, that is, the entire frequency range of electrical steel sheet, its DC characteristics The measurement principle of the AC characteristic is the impulse method, and the measurement principle of the AC characteristic is the volt-ampere method (or called the power meter, voltmeter, ammeter method). Key words:- standard
- method
- steel
- measurement
- principle
- magnetic performance measurement
-
Technical indicators ● Ambient temperature 23℃±5℃ ● Humidity <65% ● Applicable standards GB3655-2008 and IEC 60404-2 ● Equivalent magnetic circuit 940mm ● Primary turns 700 turns\Secondary turns 700 turns ● The sample size is 30mm wide±0.2mm, length 280～320mm±0.5mm ● The sample quality is not less than 240g\Suitable frequency range: DC-400Hz
Previous
Next
Recommend Products
Product Message
Hunan Forever Elegance Technology Co.,Ltd.
Address: 10th Floor, New Cooperation International Trade City, Economic and Technological Development Zone, Loudi City, Hunan Province (Intersection of Xiangyang Street East and Yingchun Road)
Douyin
Customer Message
Copyright © Hunan Forever Elegance Technology Co.,Ltd.