-
-
-
Service Support
-
-
Products
-
-
FE-2100HAB type permanent magnet material magnetic property measuring device
-
FE-2100H Permanent Magnetic Material Automatic Measuring Device
-
FE-2100MQ Rare Earth Permanent Magnet Material Quality Test Device
-
FE-2100AM permanent magnet magnetic declination measuring instrument
-
FE-2100MD Rare Earth Permanent Magnetic Flux Density Experimental Device
-
-
Contact Us
-
Sales Department 1 (Product Selection and Design)
Contact: Yonghong Zhu
Responsible scope: Selection guide for magnetic measurement products,Design of non-standard magnetic measurement andmagnetic field equipment,FE-2100AM Permanent magnet magnetic declination measuring instrument, FE-2100MQ permanent magnet magnetic moment measuring instrument.
-
Sales Department 2 (Magnetic Field Generation and Coil)
Contact: Ye Hu
Responsible scope: Mainly responsible for Gauss meter and flux meter Magnetic field coils, magnetic field generators, Measuring magnetic field coils, magnetizers and other equipment.
-
Sales Department 3 (Hard magnetic materials)
Contact: Bin Yuan
Responsible scope: FE-2100R series space magnetic field measuring instrument,Permanent magnet material measurement technology consultation,FE-2100H permanent magnet material measuring device and other equipment.
-
Sales Department 4（Soft magnetic materials）
Contact: Jiaquan Ding
Responsible scope:FE-30SST silicon steel sheet iron loss tester,FE-2100M silicon steel material measuring device,FE-2100SA Soft Magnetic AC Measuring Device,FE-2100SD soft magnetic DC measuring device and other instruments.
FE-35A iron core measuring instrument
Classification:
Hotline:
- 产品描述
- Technical parameter
-
- Commodity name: FE-35A iron core measuring instrument
- Commodity ID: 1303290245902127104
The FE-35A core meter is suitable for rapid measurement of the volt-ampere characteristics of amorphous and silicon steel transformer cores. It is equipped with a single-turn test tool and is suitable for full inspection of the product. The product design adopts an effective value conversion circuit to provide two waveforms, sine wave and half wave, which is more widely applicable.
Product introduction FE-35A core meter is suitable for rapid measurement of the volt-ampere characteristics of amorphous and silicon steel transformer cores. It is equipped with a single-turn test tool and is suitable for full inspection of the product.The product design adopts an effective value conversion circuit, which provides two waveforms, sine wave and half wave, which is more widely applicable.Product features ● Especially suitable for rapid detection of leakage current transformer core ● Suitable for the measurement of the volt-ampere characteristics of the core of silicon steel transformer ● Suitable for the measurement of the volt-ampere characteristics of amorphous transformer cores Key words:- core
- transformer
- volt-ampere
- core meter
- silicon steel transformer cores
-
Technical indicators ● Power input: single-phase 50Hz, 220V±20V, 1.0A ● Output frequency: 50Hz/60Hz selection, frequency accuracy: 0.05% ● Excitation waveform: two choices of sine wave and half-wave rectification waveform ● Primary excitation current: 0～199.99mA and 0～1999.9mA two gears ● Current accuracy: 1.0%, minimum resolution: 0.01mA ● Secondary induction voltage: 0～19.999mV and 0～199.99mV two gears ● Accuracy: 1.0%, minimum resolution: 0.01mV
Recommend Products
Product Message
Hunan Forever Elegance Technology Co.,Ltd.
Address: 10th Floor, New Cooperation International Trade City, Economic and Technological Development Zone, Loudi City, Hunan Province (Intersection of Xiangyang Street East and Yingchun Road)
Douyin
Customer Message
Copyright © Hunan Forever Elegance Technology Co.,Ltd.